Shori Exim India Private Limited
Shori Exim India Private Limited
Bhandari Gate, Batala, Punjab
SEND SMS
SEND EMAIL

Lathe Machine

Shori Exim India pvt ltd is a leading Manufacturer of all types of Lathe machines in india.

At one end of the bed (almost always the left, as the operator faces the lathe) is a headstock. The headstock contains high-precision spinning bearings. Rotating within the bearings is a horizontal axle, with an axis parallel to the bed, called the spindles. Spindles are often hollow and have exterior threads and/or an interiorMT TAPERon the "inboard" (i.e., facing to the right / towards the bed) by which work-holding accessories may be mounted to the spindle. Spindles may also have exterior threads and/or an interior taper at their "outboard" (i.e., facing away from the bed) end, and/or may have a hand-wheel or other accessory mechanism on their outboard end. Spindles are powered and impart motion to the workpiece.

The spindle is driven either by foot power from a treadle and flywheel or by a belt or gear drive to a power source. In most modern lathes this power source is an integral electric motor, often either in the headstock, to the left of the headstock, or beneath the headstock, concealed in the stand.

In addition to the spindle and its bearings, the headstock often contains parts to convert the motor speed into variousspindle speeds. Various types of speed-changing mechanism achieve this, from a cone pulley or step pulley, to a cone pulley with back gear (which is essentially a low range, similar in net effect to the two-speed rear of a truck), to an entire gear train similar to that of a manual-shift autotransmission. Some motors have electronic rheostat-type speed controls, which obviates cone pulleys or gears.

The counterpoint to the headstock is the tailstock, sometimes referred to as the loose head, as it can be positioned at any convenient point on the bed by sliding it to the required area. The tail-stock contains a barrel, which does not rotate, but can slide in and out parallel to the axis of the bed and directly in line with the headstock spindle. The barrel is hollow and usually contains a taper to facilitate the gripping of various types of tooling. Its most common uses are to hold a hardened steel center, which is used to support long thin shafts while turning, or to hold drill bits for drilling axial holes in the work piece. Many other uses are possible.[7]

Conventional Lathe Machine

Conventional Lathe Machine
  • Conventional Lathe Machine
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Electric motor3 hp
spindle speeds6
Bed Width18 inches
height of center16 inches
swing over bed32 inches
BrandEKCL-1018

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Shori exim india pvt ltd manufactures 12 ft heavy duty lathe machine for turning and facing heavy jobs .
cut taking capacity of machine is 20 mm.

 

  • Owing to the rich industrial experience and expertise in this domain, we are engaged in offering Turning Lathe Machines. These Turning Lathe Machines are designed by using sharp edge technology and quality material. Moreover, to get the total satisfaction of the customers, we provide this product at pocket friendly price.
  • Features

 

 

  • User-friendly design
  • Robust construct
  • Durable in service
CONVENTIONAL EXTRA HEAVY DUTY LATHE
Technical SpecificationKHCBB-718KHCBB-918KHCBB-1018KHCBB-1218KHCBB-1418KHCBB-1618KHCBB-1818KHCBB-1820
Bed Length7ft9ft10ft12ft14ft16ft18ft20ft
Width Of Bed456 mm456 mm456 mm456 mm456 mm456 mm456 mm456 mm
Height Of Center405 mm405 mm405 mm405 mm405 mm405 mm405 mm405 mm
Spindle Bore97 mm97 mm97 mm97 mm97 mm97 mm97 mm97 mm
Swing Over Bed790 mm790 mm790 mm790 mm790 mm790 mm790 mm790 mm
Spindle Speed88888888
Admit Between Centre700 mm1300 mm1600 mm2200 mm2800 mm3400 mm4020 mm4630 mm
Request
Callback


Additional Information:

  • Item Code: EKCL-1018
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested

Medium Duty Lathe Machines

Medium Duty Lathe Machines
  • Medium Duty Lathe Machines
  • Plant
Get Best Quote
Approx. Price: Rs 75,000 / UnitGet Latest Price

Product Details:

Width of Bed12 inches
Height of Center10 inches
Bed Length4.5 feet
Admit Between Centre750 mm
Swing Over Bed24 inches
HP Required2 HP
Spindle Bore52-75 mm
Spindle SpeedSix
Automation GradeSemi-Automatic, Manual, Automatic
Automatic GradeManual, Semi-Automatic, Automatic
LayoutHorizontal
Length Of Bed4.5 FT
Lathe Machine TypeHorizontal Lathe
Max Swing Over Bed250-500 mm
Brand/MakeShori Exim
Type of BedPedestal
ModelEKLM - 412
Max Spindle Speed500-1000 rpm
Max Turning Diameter0-500 mm
BrandShori Exim
ConditionNew
Model No.EKLM-412
MaterialCast Iron And Steel
Power(W)1HP

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Esskay Machines is leading and original equipment Lathe Machine Manufacturer, which is commonly used, to remove unwanted material, once work piece is rotated, against a cutting tool. We provide best machines, by gathering authentic high grade resources, from trusted suppliers, which makes our machines, long lasting and more efficient. The precision-engineered arrays, in Lathe machinery tool kit, truly play an important role in the industrial revolution in India, as well as in the rest of the world.
  • Every part of machinery manufactured and assembled in your Lathe machine, is put to strict quality assurance testing. These measures ensure longer machine life, and better services to you and your clients. Lathe machine are used in various Industries. Some of these industries are glass working, Parts reclamation, metal working, woodturning, thermal spraying, metal spinning etc.
  • Parts of Lathe Machine are Bed, Legs, Headstock, apron, Tailstock, Spindle, Saddle, Tool Post, Carriage, Cross-slide, Tool Rest. Now understand bit about all these parts. Bed forms the base or the platform on which the different fixed and operations parts of the Lathe are mounted. Bed bears two important parts- headstock and tail stock, to support the work piece, and functionally provides a base, for the movement of carriage assembly, which carries the tool. Bed is heavily ribbed in design construction and robust in structure. We provide Bed in three models Banka 35, 36, 43 and 60 models. The bed ways align the components of the lathe.
  • The legs from the supporting structures that carry the entire load of machine and function to elevate the lathe bed to a working height.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-412

BED LENGTH

1200 MM

WIDTH OF BED

300 MM

HEIGHT OF CENTER

250 MM

SPINDLE BORE

52 MM

SWING IN GAP

800 MM

SWING OVER BED

500 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

750 MM

LEADING SCREW DIA.

25 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLM-412
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: SAHNEWAL-LUDHIANA
  • Production Capacity: 100 SETS
  • Delivery Time: 7 DAYS
  • Packaging Details: WOODEN PACKING
Yes! I am Interested
View PDF

Automatic Lathe Machine

Automatic Lathe Machine
  • Automatic Lathe Machine
  • Plant
  • Automatic Lathe Machine
Get Best Quote
Approx. Price: Rs 95,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Height of Center12 inches
Bed Length6 feet
Swing Over Bed28 inches
Spindle Bore75-100 mm
Width of Bed14 inches
Spindle SpeedSix
HP Required2 HP
Admit Between Centre750 mm
Automation GradeManual, Automatic, Semi-Automatic
Length Of Bed6FT
LayoutHorizontal
Size6FT
ModelEKLM-614
Max Swing Over Bed500-750 mm
Type of BedPedestal
Brand/MakeShori Exim
Max Spindle Speed500-1000 rpm
Max Turning Diameter500-1000 mm
Height of Centre12 Inches
BrandShori Exim
ConditionNew
Lathe Machine TypeHorizontal Lathe
Model No.Eklm-614
Dimension(L*W*H)7FT X 5 FT X 5FT
ApplicationTurning, Threading, Facing
Automatic GradeSemi-Automatic
Power(W)2HP

Shori exim presents medium duty lathe machine 6ft fitted with automatic norton gear box . This lathe machine is suitable for turning , threading and facing of cast iron or steel components.

Anautomatic latheis alathe(usually ametalworking lathe) whose actions are controlledautomatically. Although all electronically controlled (CNC) lathes are automatic, they are usually not called by that name, as explained under "General nomenclature". The first kinds of automatic lathes were mechanically automated ones, from the 1870s until the advent of NC and CNC in the 1950s and 1960s. CNC has not yet entirely displaced mechanically automated machines. The latter type of machine tool is no longer being newly built, but many existing
Request
Callback


Additional Information:

  • Item Code: EKL-614
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: SAHNEWAL-LUDHIANA
  • Production Capacity: 100 SETS
  • Delivery Time: 7 DAYS
  • Packaging Details: WOODEN PACKING
Yes! I am Interested

Semi Automatic Lathe Machine

Semi Automatic Lathe Machine
  • Semi Automatic Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Lathe Machine TypeHorizontal Lathe, Multi Axis Lathe
Brand/MakeShori Exim
Max Spindle Speed500-1000 rpm
Max Turning Diameter500-1000 mm
BrandSE
ConditionNew
Automation GradeSemi-Automatic
Model No.ekl-1016
Swing In Gap (mm)1000 mm
Motor Power (HP)2hp
Swing Diameter (mm)28 inches
Admit Between Centre2000 mm
Automatic GradeAutomatic

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Semi Automatic Lathe Machine
size 10 ft , bed width- 16 inches , heigth of center- 14 inches

Lathes of this size that are designed for mass manufacture, but not offering the versatile screw-cutting capabilities of the engine or bench lathe, are referred to as "second operation" lathes.
Lathes with a very large spindle bore and a chuck on both ends of the spindle are called "oil field lathes".
Fully automatic mechanical lathes, employing cams and gear trains for controlled movement, are called screw machines.
Lathes that are controlled by a computer are CNC lathes.
Lathes with the spindle mounted in a vertical configuration, instead of horizontal configuration, are called vertical lathes or vertical boring machines. They are used where very large diameters must be turned, and the workpiece (comparatively) is not very long.
A lathe with a cylindrical tail-stock that can rotate around a vertical axis, so as to present different tools towards the headstock

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1016

BED LENGTH

3000 MM

WIDTH OF BED

400 MM

HEIGHT OF CENTER

350 MM

SPINDLE BORE

130 MM

SWING IN GAP

1050 MM

SWING OVER BED

700 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1800 MM

LEADING SCREW DIA.

57 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: SemiAutomaticLathe
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested
View PDF

Semi Automatic Horizontal Heavy Duty Lathe Machine

Semi Automatic Horizontal Heavy Duty Lathe Machine
  • Semi Automatic Horizontal Heavy Duty Lathe Machine
Get Best Quote
Approx. Price: Rs 4 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automatic GradeAutomatic
Lathe Machine TypeHorizontal Lathe
Brand/MakeSHORI EXIM
Max Spindle Speed 500-1000 rpm, 500-1000 rpm
ConditionNew
Automation GradeSemi-Automatic
Spindle Bore (mm)105

Shori Exim India pvt ltd is a leading Manufacturer of Semi Automatic Heavy Duty lathe machine in india
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested

Manual Light Duty Lathe Machine

Manual Light Duty Lathe Machine
  • Manual Light Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.25 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Spindle Bore75-150mm
Bed Length8 feet
Admit Between Centre1500 mm
Spindle SpeedSix
HP Required2 HP
Swing Over Bed28 inches
Height of Center12 inches
Width of Bed14 inches
Lathe Machine TypeHorizontal Lathe
Brand/MakeShori Exim
Max Swing Over Bed500-750 mm
Size8FT
Max Spindle Speed0-500 rpm
ModelEKLM-816
Max Turning Diameter500-1000 mm
Max Turning Diameter(millimeter)800MM
Model No.EKLM-816
Dimension(L*W*H)8FT X 5 FT X 5FT
BrandSHORI EXIM
MaterialCast Iron/ Steel
ApplicationFacing , Turning
Power(W)3HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Shori exim presents 8ft Heavy Duty Lathe Machine, suitable for turning of hubs, drums and other heavy duty metal parts.

n metal spinning, a disk of sheet metal is held perpendicularly to the main axis of the lathe, and tools with polished tips (spoons) or roller tips are hand-held, but levered by hand against fixed posts, to develop pressure that deforms the spinning sheet of metal.

Metal-spinning lathes are almost as simple as wood-turning lathes. Typically, metal spinning requires a mandrel, usually made from wood, which serves as the template onto which the workpiece is formed (asymmetric shapes can be made, but it is a very advanced technique). For example, to make a sheet metal bowl, a solid block of wood in the shape of the bowl is required; similarly, to make a vase, a solid template of the vase is required.

Given the advent of high-speed, high-pressure, industrial die forming, metal spinning is less common now than it once was, but still a valuable technique for producing one-off prototypes or small batches, where die forming would be uneconomical


SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-814

BED LENGTH

2400 MM

WIDTH OF BED

350 MM

HEIGHT OF CENTER

300 MM

SPINDLE BORE

125 MM

SWING IN GAP

900 MM

SWING OVER BED

700 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1500 MM

LEADING SCREW DIA.

25 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: 814
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: SAHNEWAL-LUDHIANA
  • Production Capacity: 50 SETS/MONT
  • Delivery Time: 7 DAYS
  • Packaging Details: WOODEN PACKING
Yes! I am Interested
View PDF

Medium Duty Lathe Machine

Medium Duty Lathe Machine
  • Medium Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity20 Piece
Spindle Bore75-175 mm
Bed Length10 feet
Swing Over Bed32 inches
HP Required3 HP
Spindle SpeedSix
Width of Bed16 inches
Admit Between Centre1500 mm
Height of Center14 inches
Automation GradeSemi-Automatic, Automatic, Manual
Length Of Bed10FT
Lathe Machine TypeHorizontal Lathe
Brand/MakeShori Exim
SizeBed Width - 16 Inches
Max Swing Over Bed500-750 mm
Max Spindle Speed500-1000 rpm
ModelEKLM-1016
Height of Centre14 Inches
Max Turning Diameter500-1000 mm
BrandShori Exim
ConditionNew
Model No.EKLM-1016
Dimension(L*W*H)11 FT X 5 FT X 5 FT
MaterialCast Iron
ApplicationTurning , Facing And Threading
Automatic GradeAutomatic
Type of BedPedestal
Power(W)3 HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD


Shori exim india pvt ltd manufactured medium duty lathe machine 10ft for high speed work with high accuracy, this machine is specially made for pople who are into mass production.
In a metalworking lathe, metal is removed from the workpiece using a hardened cutting tool, which is usually fixed to a solid moveable mounting, either a tool-post or a turret, which is then moved against the workpiece using handwheels and/or computer-controlled motors. These cutting tools come in a wide range of sizes and shapes, depending upon their application. Some common styles are diamond, round, square and triangular.
The tool-post is operated by lead-screws that can accurately position the tool in a variety of planes. The tool-post may be driven manually or automatically to produce the roughing and finishing cuts required to turn the workpiece to the desired shape and dimensions, or for cutting threads, worm gears, etc. Cutting fluid may also be pumped to the cutting site to provide cooling, lubrication and clearing of swarf from the workpiece. Some lathes may be operated under control of a computer for mass production of parts

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1016

BED LENGTH

3000 MM

WIDTH OF BED

400 MM

HEIGHT OF CENTER

350 MM

SPINDLE BORE

130 MM

SWING IN GAP

1050 MM

SWING OVER BED

700 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1800 MM

LEADING SCREW DIA.

57 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKL-1016
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: SAHNEWAL-LUDHIANA
  • Production Capacity: 50 SETS
  • Delivery Time: 7 DAYS
  • Packaging Details: WOODEN PACKING
Yes! I am Interested
View PDF

Automatic Heavy Duty Lathe Machine

Automatic Heavy Duty Lathe Machine
  • Automatic Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.9 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automatic GradeAutomatic
Automation Grade Automatic
LayoutHorizontal
ModelEKLH-1218
Max Swing Over Bed750-1000 mm, 750-1000 mm
Max Spindle Speed 0-500 rpm, 0-500 rpm
Brand/MakeShori Exim
Max Turning Diameter 500-1000 mm, 500-1000 mm
Max Turning Diameter(milimeter)800
BrandSHORI EXIM
ConditionNew
Lathe Machine TypeHorizontal Lathe
Model No.EKLH-1218
Size12FT
MaterialCast Iron
ApplicationFACING/TURNING/THREADING
Power(W)5HP

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Shori exim india pvt ltd manufactures 12 ft heavy duty lathe machine for turning and facing heavy jobs .
  • cut taking capacity of machine is 20 mm
  • Product Details
  • Automatic GradeAutomatic
  • Being a leader in the industry, we are engaged in offering a qualitative range ofAutomatic Heavy Duty Lathe Machineto our clients.
  • Features
  • High performance
  • Minimum maintenance
  • Less energy consumption

Technical Specifications
Model NumberKH-0KH-1KH-2KH-3KH-4KH-5KH-6KH-7KH-8
Bed Length5'.6"7'9'10'12"14'16'18'20'
Width of Bed325 mm325 mm325 mm325mm325mm325 mm325 mm325mm325mm
Height of Center267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm
Spindle Bore51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm
Swing Over Bed525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm
Spindle Speed888888888
Admit Between Centre525 mm1000 mm1600 mm1900 mm2500 mm3100 mm3710 mm4320 mm4930 mm
PRICE
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 100 SETS/MONTH
  • Delivery Time: 7 DAYS
  • Packaging Details: Wooden box making
Yes! I am Interested
View PDF

Heavy Duty Lathe Machine

Heavy Duty Lathe Machine
  • Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 2.2 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automatic GradeSemi-Automatic, Automatic
LayoutHorizontal
Lathe Machine TypeHorizontal Lathe
Brand/MakeSE
Max Swing Over Bed750-1000 mm
ModelEKLH-1220
Max Spindle Speed0-500 rpm
Max Turning Diameter500-1000 mm
Max Turning Diameter(millimeter)40 INCHES
BrandSE
ConditionNew
Automation GradeAutomatic
Model No.EKLH-1220
Size12FT
ApplicationFACING/TURNING/GRINDING
Power5HP

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • heavy duty lathe machine 12 dt with turning dia 40 inches suitable for roll turning and roll grinding also.roll grinding can be done by tool post grinding attachment
  • Heavy duty lathe machines
  • punjab Lathe Manufacturing Company is one of the foremostheavy-duty lathe machine manufacturers in India, engineering and designing sophisticated machineries for dealing with heavier loads. These machines are therefore designed and engineered with powerful machining capacities for turning large metal work pieces.
  • These heavy duty lathe machines are equipped with specialized features like ground headstock spindles and robust one piece planar lathe beds which provide for a solid base and simultaneously facilitating seamless parallel movement of carriage and tailstock in alignment with the axis of the spindle. punjab Lathe uses alloy steel to provide strength and sturdiness to the machine for lasting durability. A specialized oil pump is used which helps to lubricate the rotating spindles and bearings in order to give more power to the machines by neutralizing the inner frictions and tensions within the lathe mechanism and also assists in the process of cooling overheated parts. Moreover in order to enhance safety and mitigating the chances of accident and enable easy replacement of the partsheavy duty lathe machines manufacturerslike punjab Lathe have introduced bayonet type spindle nose fittings to ensure a valuable fastening mechanism.
  • Shori exim india pvt ltd manufacures heavy duty 16 ft lathe machine for big size roll turning and facing jobs.
  • Max turning diameter is 44 inches.
  • Max turning length is 120 inches
  • Technical Specifications
    Model NumberKH-0KH-1KH-2KH-3KH-4KH-5KH-6KH-7KH-8
    Bed Length5'.6"7'9'10'12"14'16'18'20'
    Width of Bed325 mm325 mm325 mm325mm325mm325 mm325 mm325mm325mm
    Height of Center267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm
    Spindle Bore51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm
    Swing Over Bed525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm
    Spindle Speed888888888
    Admit Between Centre525 mm1000 mm1600 mm1900 mm2500 mm3100 mm3710 mm4320 mm4930 mm
Request
Callback


Additional Information:

  • Item Code: EKLH-1220
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: SAHNEWAL
  • Production Capacity: 50 SETS/MONTH
  • Delivery Time: 7DAYS
  • Packaging Details: WOODEN
Yes! I am Interested

Semi Automatic Horizontal Heavy Duty Lathe Machine

Semi Automatic Horizontal Heavy Duty Lathe Machine
  • Semi Automatic Horizontal Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 2.6 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Lathe Machine Typeroll Turning Lathe, Horizontal Lathe, Floor Lathe
Max Swing Over Bed 750-1000 mm, 750-1000 mm
Brand/MakeSE
ModelShori
Max Spindle Speed0-500 rpm, 0-500 rpm
Max Turning Diameter500-1000 mm, 500-1000 mm
Max Turning Diameter(milimeter)Shori Exim
BrandSE
ConditionNew
Automation GradeSemi-Automatic
Model No.EKLH-1422
Size14 FT
ApplicationFacing, Roll Turning, Threading
Power(W)5HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality array of Heavy Duty Lathe Machine.
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 100 sets
  • Delivery Time: 7 days
  • Packaging Details: wooden
Yes! I am Interested
View PDF

Heavy Duty Lathe Machine

Heavy Duty Lathe Machine
  • Heavy Duty Lathe Machine
Get Best Quote
Approx. Price: Rs 3.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Lathe Machine TypeHorizontal Lathe, Floor Lathe
Max Swing Over Bed1000-1500 mm
Brand/MakeSE
Max Spindle Speed0-500 rpm
ModelEKLH-1624
Max Turning Diameter(millimeter)44 Inches
Max Turning Diameter1000-1500 mm
BrandShori Exim
ConditionNew
Automation GradeSemi-Automatic
Model No.EKLH-1624
Size16FT
ApplicationFacing/turning/threading/grinding
Power7.5 HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD


Heavy duty lathe machines

punjab Lathe Manufacturing Company is one of the foremostheavy-duty lathe machine manufacturers in India, engineering and designing sophisticated machineries for dealing with heavier loads. These machines are therefore designed and engineered with powerful machining capacities for turning large metal work pieces.

These heavy duty lathe machines are equipped with specialized features like ground headstock spindles and robust one piece planar lathe beds which provide for a solid base and simultaneously facilitating seamless parallel movement of carriage and tailstock in alignment with the axis of the spindle. punjab Lathe uses alloy steel to provide strength and sturdiness to the machine for lasting durability. A specialized oil pump is used which helps to lubricate the rotating spindles and bearings in order to give more power to the machines by neutralizing the inner frictions and tensions within the lathe mechanism and also assists in the process of cooling overheated parts. Moreover in order to enhance safety and mitigating the chances of accident and enable easy replacement of the partsheavy duty lathe machines manufacturerslike punjab Lathe have introduced bayonet type spindle nose fittings to ensure a valuable fastening mechanism.

Since, we offer a wide variety of machine models having different sizes, specifications, features and accessories; please write to us to know more about theheavy duty lathe machine price.
manufactures
Shori exim india pvt ltd heavy duty 16 ft lathe machine for big size roll turning and facing jobs.
Max turning diameter is 44 inches.
Max turning length is 120 inches


Technical Specifications









Model NumberKH-0KH-1KH-2KH-3KH-4KH-5KH-6KH-7KH-8

Bed Length5'.6"7'9'10'12"14'16'18'20'

Width of Bed325 mm325 mm325 mm325mm325mm325 mm325 mm325mm325mm

Height of Center267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm267 mm

Spindle Bore51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm51 mm

Swing Over Bed525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm525 mm

Spindle Speed888888888

Admit Between Centre525 mm1000 mm1600 mm1900 mm2500 mm3100 mm3710 mm4320 mm4930 mm
Request
Callback


Additional Information:

  • Item Code: EKLH-1624
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 50 sets/month
  • Delivery Time: 15 days
Yes! I am Interested

Automatic Heavy Duty Lathe Machine

Automatic Heavy Duty Lathe Machine
  • Automatic Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 4.8 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automation TypeSemi-Automatic
LayoutHorizontal
Max Swing Over Bed1000-1500 mm
Brand/MakeShori Exim
Bed Size (mm)26 INCHES
Max Spindle Speed0-500 rpm
ModelEKLH- 1826
Max Turning Diameter(millimeter)48 INCHES
Max Turning Diameter1000-1500 mm
Chuck Diameter (mm)48 INCHES
ConditionNew
BrandSHORI EXIM
Automation GradeSemi-Automatic
Model No.EKLH-1826
Automatic GradeSemi-Automatic
Power(W)10 HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD


Heavy duty lathe machine 18 ft with turning dia 48 inches with turning length 3. 5 mtr
In a metalworking lathe, metal is removed from the workpiece using a hardened cutting tool, which is usually fixed to a solid moveable mounting, either a tool-post or a turret, which is then moved against the workpiece using handwheels and/or computer-controlled motors. These cutting tools come in a wide range of sizes and shapes, depending upon their application. Some common styles are diamond, round, square and triangular

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1826

BED LENGTH

5400 MM

WIDTH OF BED

650 MM

HEIGHT OF CENTER

600 MM

SPINDLE BORE

125 MM

SWING IN GAP

1600 MM

SWING OVER BED

1200 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

3000 MM

LEADING SCREW DIA.

57 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLH-1826
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 10 SETS
  • Delivery Time: 30 DAYS
  • Packaging Details: WOODEN PACKING
Yes! I am Interested
View PDF

Manual Heavy Duty Lathe Machine

Manual Heavy Duty Lathe Machine
  • Manual Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 6.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Brand/MakeShori Exim
ModelEKLH-2030
Max Turning Diameter(millimeter)56 Inches
ConditionNew
Size20 FT
ApplicationTurning /facing/ Threading
Automatic GradeSemi-Automatic

WELCOME TO SHORIEXIM INDIA.PVT.LTD


Shori exim india pvt manufactures 20 ft lathe machine with 56 Inches turning diameter
Turning length- 4mtr
Many types of lathes can be equipped with accessory components to allow them to reproduce an item the original item is mounted on one spindle, the blank is mounted on another, and as both turn in synchronized manner, one end of an arm "reads" the original and the other end of the arm "carves" the duplicate.
A reduction lathe is a specialized lathe that is designed with this feature and incorporates a mechanism similar to a pantograph, so that when the "reading" end of the arm reads a detail that measures one inch (for example), the cutting end of the arm creates an analogous detail that is (for example) one quarter of an inch (a 41 reduction, although given appropriate machinery and appropriate settings, any reduction ratio is possible).
Reducing lathes are used in coin-making, where a plaster original (or an epoxy master made from the plaster original, or a copper-shelled master made from the plaster original, etc.) is duplicated and reduced on the reducing lathe, generating a master die.
Rotary lathes[edit]
A lathe in which softwood, like spruce or pine, or hardwood, like birch, logs are turned against a very sharp blade and peeled off in one continuous or semi-continuous roll. Invented by Immanuel Nobel (father of the more famous Alfred Nobel). The first such lathes in the United States were set up in the mid-19th century.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-2030

BED LENGTH

6000 MM

WIDTH OF BED

750 MM

HEIGHT OF CENTER

700 MM

SPINDLE BORE

104 MM

SWING IN GAP

1800 MM

SWING OVER BED

1400 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

3500 MM

LEADING SCREW DIA.

55 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLH-2030
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 20 SETS/MONTH
  • Delivery Time: 20 DAYS
  • Packaging Details: WOODEN
Yes! I am Interested
View PDF

Automatic Medium Duty Lathe Machine

Automatic Medium Duty Lathe Machine
  • Automatic Medium Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.6 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Spindle Bore75-175 mm
Width of Bed16 inches
Bed Length8 feet
Spindle SpeedSix
Admit Between Centre1350 mm
HP Required3 HP
Swing Over Bed32 inches
Height of Center14 inches
Automatic GradeAutomatic
Brand/MakeSE
Size8ft
ModelEKLV-816
BrandShori Exim
Model No.EKLV-816

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD


  • Shori exim india pvt ltd manufactures vee belt driven lathe machine.
  • This machine is useful for easy operating and easy working. Maximum turning diameter is 28 inches
  • Maximum turning length is 1.5 mtr
  • There are some effects on material properties when using a metalworking lathe. There are few chemical or physical effects, but there are many mechanical effects, which include residual stress, micro-cracks, work-hardening, and tempering in hardened materials. For details of many metal and woodworking lathes

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-816

BED LENGTH

2400 MM

WIDTH OF BED

400 MM

HEIGHT OF CENTER

350 MM

SPINDLE BORE

125 MM

SWING IN GAP

1100 MM

SWING OVER BED

700 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1500 MM

LEADING SCREW DIA.

35 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLV-816
  • Pay Mode Terms: T/T (Bank Transfer),D/P
  • Packaging Details: Wooden
Yes! I am Interested
View PDF

Manual Centre Lathe Machine

Manual Centre Lathe Machine
  • Manual Centre Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.85 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
spindle bore105mm
Bed width450mm
height of center400mm
ConditionNew
Max Swing Over Bed (mm)36 INCHES
Automatic GradeAutomatic

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Shori exim india manufactures 10 ft heavy duty lathe machine with turning diameter capacity 40 inches
This machine is perfect for heavy duty roll turning and roll grinding work.This machine is known roll turning lathe machine, roll grinding lathe machine
Grinding can be done with the help of tool post grinding attachment.
Manually controlled metalworking lathes are commonly provided with a variable-ratio gear-train to drive the main lead-screw. This enables different thread pitches to be cut. On some older lathes or more affordable new lathes, the gear trains are changed by swapping gears with various numbers of teeth onto or off of the shafts, while more modern or expensive manually controlled lathes have a quick-change box to provide commonly used ratios by the operation of a lever. CNC lathes use computers and servomechanisms to regulate the rates of movement.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1018

BED LENGTH

3000 MM

WIDTH OF BED

450 MM

HEIGHT OF CENTER

400 MM

SPINDLE BORE

125 MM

SWING IN GAP

1600 MM

SWING OVER BED

1200 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1800 MM

LEADING SCREW DIA.

35 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLV-1018
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Packaging Details: wooden
Yes! I am Interested
View PDF

V- Belt Type Lathe Machine

V- Belt Type Lathe Machine
  • V- Belt Type Lathe Machine
  • Plant
  • V- Belt Type Lathe Machine
Get Best Quote
Approx. Price: Rs 2.2 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Bed Length12 feet
Spindle Bore75-200 mm
Admit Between Centre2400 mm
Spindle SpeedSix
Swing Over Bed36 inches
Height of Center450 mm
HP Required5 HP
Width of Bed500 mm
ModelEKLV-1220
Brand/MakeSE
BrandSE
Model No.EKLV-1220
Automatic GradeAutomatic

WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • We are the prominent manufacturer and supplier of a wide range ofV Belt Type Heavy Duty Lathe Machine. These heavy duty lathe machines are designed using high grade required material and advanced technology. Our offered lathe machines are examined by our professionals on industry developed parameters. Heavy duty lathe machines offered by us are also treasured by our clients for their countless quality aspects.
  • With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of Vee Belt Type Lathe Machine.
Request
Callback


Additional Information:

  • Item Code: EKL-1220
  • Pay Mode Terms: T/T (Bank Transfer),D/P
  • Packaging Details: Wooden
Yes! I am Interested

V Belt Driven Lathe Machine

V Belt Driven Lathe Machine
  • V Belt Driven Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 2.9 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Width of Bed550 mm
Spindle SpeedSix
Height of Center500 mm
Swing Over Bed40 inches
Admit Between Centre2750 mm
HP Required5 HP
Spindle Bore75-200 mm
Bed Length14 feet
Brand/MakeEKLV-1422

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Shori exim india pvt ltd manufactures 12 ft heavy duty lathe machine for turning and facing heavy jobs .
cut taking capacity of machine is 20 mm.
Threading[edit]Three different types and sizes of taps.Main article Threading (manufacturing)
There are many threading processes including cutting threads with a tap or die, thread milling, single-point thread cutting, thread rolling, cold root rolling and forming, and thread grinding. A tap is used to cut a female thread on the inside surface of a pre-drilled hole, while a die cuts a male thread on a preformed cylindrical rod.
Grinding[edit]A surface grinderMain article Grinding (abrasive cutting)
Grinding uses an abrasive process to remove material from the workpiece. A grinding machine is a machine tool used for producing very fine finishes, making very light cuts, or high precision forms using an abrasive wheel as the cutting device. This wheel can be made up of various sizes and types of stones, diamonds or inorganic materials.
The simplest grinder is a bench grinder or a hand-held angle grinder, for deburring parts or cutting metal with a zip-disc.
Grinders have increased in size and complexity with advances in time and technology. From the old days of a manual toolroom grinder sharpening endmills for a production shop, to today's 30000 RPM CNC auto-loading manufacturing cell producing jet turbines, grinding processes vary greatly.
Grinders need to be very rigid machines to produce the required finish. Some grinders are even used to produce glass scales for positioning CNC machine axis. The common rule is the machines used to produce scales be 10 times more accurate than the machines the parts are produced for.
In the past grinders were used for finishing operations only because of limitations of tooling. Modern grinding wheel materials and the use of industrial diamonds or other man-made coatings (cubic boron nitride)

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1422

BED LENGTH

4200 MM

WIDTH OF BED

550 MM

HEIGHT OF CENTER

500 MM

SPINDLE BORE

104 MM

SWING IN GAP

1400MM

SWING OVER BED

1000 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

2500 MM

LEADING SCREW DIA.

45 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLV-1422
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Floor Lathe Machine

Floor Lathe Machine
  • Floor Lathe Machine
  • Plant
  • Floor Lathe Machine
Get Best Quote
Approx. Price: Rs 4.8 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Swing over bed1200 mm
Height of center600 mm
Width of bed650 mm
spindle bore104 to 200 mm
Swing over carriage1050 mm
Admit between cneter3500
Bed Length18ft
Brand/MakeShori Exim
ModelEKLV-1826
Model No.EKLV-1826

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD


  • Shori exim india manufactures 18 ft heavy duty lathe machine with turning diameter capacity 48 inches
  • This machine is perfect for heavy duty roll turning and roll grinding work.This machine is known roll turning lathe machine, roll grinding lathe machine
  • Grinding can be done with the help of tool post grinding attachment.
Request
Callback


Additional Information:

  • Item Code: EKLV-1826
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Vee Belt Type Lathe Machine

Vee Belt Type Lathe Machine
  • Vee Belt Type Lathe Machine
Get Best Quote
Approx. Price: Rs 6.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
swing over carriage50 inches
swing over bed56 inches
Machine length20ft
spindle bore104 to 200 mm
Bed width30 inches
Height of center28 inches
Brand/MakeSE
ModelEKLV-2030
BrandSE
Model No.EKLV-2030
Automatic GradeSemi-Automatic
Power(W)15 HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • We are the prominent manufacturer and supplier of a wide range ofV Belt Type Heavy Duty Lathe Machine. These heavy duty lathe machines are designed using high grade required material and advanced technology. Our offered lathe machines are examined by our professionals on industry developed parameters. Heavy duty lathe machines offered by us are also treasured by our clients for their countless quality aspects.
  • With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of Vee Belt Type Lathe Machine.
Request
Callback


Additional Information:

  • Item Code: EKLV-2030
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested

Automatic Light Duty Lathe Machine

Automatic Light Duty Lathe Machine
  • Automatic Light Duty Lathe Machine
Get Best Quote
Approx. Price: Rs 65,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Bed width12 inches
swing over bed20 inches
Machine weight1000 kgs
Machine length4.5 ft
spindle speedssix
swing over carriage16 inches
spindle bore52mm
Height of center10 inches
Brand/MakeSE
ModelEKLC- 412
BrandSHORI EXIM
Model No.EKLC-412
Power(W)1HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Product description
Backed by years of industry experience, we are engaged in offering a premium quality range ofAutomatic Light Duty Lathe Machine.We are a prominent name engaged in providing the best-in-class range ofLight Lathe Machine. These machines are manufactured by making use of high-grade steel and other components incorporating latest machinery. The raw-material required for the manufacture of these products are procured from the authorized vendors in business. Keeping in mind divergent demands of the customers, we are offering these chains in different sizes and specification.

Request
Callback


Additional Information:

  • Item Code: EKLC-412
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Packaging Details: Wooden
Yes! I am Interested

Center Lathe Machine

Center Lathe Machine
  • Center Lathe Machine
Get Best Quote
Approx. Price: Rs 1.2 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
swing over bed24 inches
Height of center12 inches
Bed width14 inches
swing over carriage20 inches
Machine length6ft
spindle speedssix
Machine weight1200 kgs
spindle bore75 to 125 mm
Brand/MakeShori Exim
ModelEKLC-614
BrandSHORI EXIM
Model No.EKLC-614
Power(W)2 HP

The Centre Lathe is used to manufacture cylindrical shapes from a range of materials including; steels and plastics. Many of the components that go together to make an engine work have been manufactured using lathes. These may be lathes operated directly by people (manual lathes) or computer controlled lathes (CNC machines) that have been programmed to carry out a particular task. A basic manual centre lathe is shown below. This type of lathe is controlled by a person turning the various handles on the top slide and cross slide in order to make a product / part.
Center lathe machine 6ft use for turning/threading/facing , its good all purpose tool room work
Request
Callback


Additional Information:

  • Item Code: EKLC-614
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 100 sets/month
  • Delivery Time: ready stock
  • Packaging Details: wooden
Yes! I am Interested

Heavy Duty Roll Turning Lathe Machine

Heavy Duty Roll Turning Lathe Machine
  • Heavy Duty Roll Turning Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 7.2 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Heigth of center28 inches
swing over carriage48 inches
spindle speeds8
Bed Width30 inches
LayoutHorizontal
Brand/MakeSE
ModelSHORI EXIM
Warranty1 year
Lead Screw Diameter60MM
Automation GradeAutomatic
No. Spindle Speed6
Main Motor10 HP
Spindle Bore125 MM,104mm to 200 mm,125 MM,104mm to 200 mm,125 MM,104mm to 200 mm,125 MM,104mm to 200 mm
Swing In Gap Diameter1800 MM
Swing Over Bed1400 MM,56 inches,1400 MM,56 inches,1400 MM,56 inches,1400 MM,56 inches
Size22 FT
Automatic GradeAutomatic
Admit Between Centre4500 MM

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • SHOR EXIM PRIVATE LTD is leading and original equipment Lathe Machine Manufacturer, which is commonly used, to remove unwanted material, once work piece is rotated, against a cutting tool. We provide best machines, by gathering authentic high grade resources, from trusted suppliers, which makes our machines, long lasting and more efficient. The precision-engineered arrays, in Lathe machinery tool kit, truly play an important role in the industrial revolution in India, as well as in the rest of the world.

MODEL NUMBER

EKL-2230

BED LENGTH

6600 MM

WIDTH OF BED

750 MM

HEIGHT OF CENTER

700 MM

SPINDLE BORE

130 MM

SWING IN GAP

1900 MM

SWING OVER BED

1400 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

4500 MM

LEADING SCREW DIA.

65 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLR-2230
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Production Capacity: 10 SETS/MONTH
  • Delivery Time: 15 DAYS
Yes! I am Interested
View PDF

Semi Automatic Lathe Machine

Semi Automatic Lathe Machine
  • Semi Automatic Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 13 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Bed width36 inches
swing over carriage60 inches
spindle speeds8
Height of center34 inches
swing over bed68 inches
spindle bore104 mm to 200 mm
Brand/MakeShori Exim
ModelSE
Size30 FT

WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Parts of Lathe Machine are Bed, Legs, Headstock, apron, Tailstock, Spindle, Saddle, Tool Post, Carriage, Cross-slide, Tool Rest. Now understand bit about all these parts. Bed forms the base or the platform on which the different fixed and operations parts of the Lathe are mounted. Bed bears two important parts- headstock and tail stock, to support the work piece, and functionally provides a base, for the movement of carriage assembly, which carries the tool. Bed is heavily ribbed in design construction and robust in structure. We provide Bed in three models Banka 35, 36, 43 and 60 models. The bed ways align the components of the lathe.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-2036

BED LENGTH

6000 MM

WIDTH OF BED

900 MM

HEIGHT OF CENTER

850 MM

SPINDLE BORE

104 MM

SWING IN GAP

2100MM

SWING OVER BED

1700 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

3500 MM

LEADING SCREW DIA.

45 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLR-2036
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Heavy Duty Roll Turning Lathe Machine

Heavy Duty Roll Turning Lathe Machine
  • Heavy Duty Roll Turning Lathe Machine
Get Best Quote
Approx. Price: Rs 22 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
swing over carriage82 inches
spidle bore150 mm
spindle speeds8
Bed Width48 inches
Height of center46 inches
swing over bed92 inches
Brand/MakeSHORI EXIM
ModelSE

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Tailstock is a movable casting located opposite the headstock, by the sides of bed structure. Tail-stock is used for machining operations including drilling, reaming, and tapping.Spindle is a hollow horizontal axle, with interior and exterior threads on the inboard by which the wood working pieces can be mounted on. The Saddle, an H-shaped casting mounted on the top of the lathe machinery, which functions as supportive structure to mount the cross-slide and the apron. Carriage is composed of two parts saddle and an apron and is used as a mount to the cross slide. Cross-slide is a flat piece that traverse across the bed and placed at right angles with the bed. Tool Post is a part of Lathe machine that is placed on the top of cross-slide and it holds the cutting tool firm during operation. Tool Rests is a horizontal area from where, the spindle and the tail stock operate and allow functioning of hand tools to be braced against and levered into work piece for trimming or cutting function.
Request
Callback


Additional Information:

  • Item Code: EKLR-4048
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested

Lathe Machine

Lathe Machine
  • Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 1.95 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Admit Between center1800 mm
swing over bed32 inches
Bed Width18 inches
Height of center16 inches
Brand/MakeShori Exim
ModelSE
Size10FT
Power(W)3hp

WELCOME TO SHORIEXIM INDIA.PVT.LTD

The legs from the supporting structures that carry the entire load of machine and function to elevate the lathe bed to a working height. Headstock is located on the one end of the bed. The headstock contains the high precision bearings which hold the horizontal axle--known as the spindle. Headstock serves as housing station for the back gears, the feed reverse gear, driving pulleys, headstock spindle, and live center. Further a quick-change gear-box is placed below the headstock and contains a number of different sized gears. These intermediate gears allow the correct ratio and direction to be set for cutting threads or worm gears. The apron is fastened to the saddle and it houses the gears, clutches and levers required to move the carriage or cross slide.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1018

BED LENGTH

3000 MM

WIDTH OF BED

450 MM

HEIGHT OF CENTER

400 MM

SPINDLE BORE

125 MM

SWING IN GAP

1600 MM

SWING OVER BED

1200 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

1800 MM

LEADING SCREW DIA.

35 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKPL-1018
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Horizontal Lathe Machine

Horizontal Lathe Machine
  • Horizontal Lathe Machine
  • Plant
  • Horizontal Lathe Machine
  • Horizontal Lathe Machine
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Spindle bore104mm
Swing over bed36 inches
Bed Width20 inches
Height of Center18 inches
Admit Between center2400 mm
Size12ft

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • horizontal lathes have been designed to fulfill the requirements of a wide range of automotive applications such as crankshafts, camshafts, CV joints or gearbox transmission axles that combine multiple shape tools to perform operations such as roughing, finishing, burnishing, hard turning and measuring.
Every part of machinery manufactured and assembled in your Lathe machine, is put to strict quality assurance testing. These measures ensure longer machine life, and better services to you and your clients. Lathe machine are used in various Industries. Some of these industries are glass working, Parts reclamation, metal working, wood turning, thermal spraying, metal spinning etc.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1220

BED LENGTH

3600 MM

WIDTH OF BED

500 MM

HEIGHT OF CENTER

450 MM

SPINDLE BORE

125 MM

SWING IN GAP

1300 MM

SWING OVER BED

900 MM

NO. OF SPINDLE SPEED

6

ADMIT BETWEEN CENTER

2400 MM

LEADING SCREW DIA.

52 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKPL-1220
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Semi Automatic Heavy Duty Lathe Machine

Semi Automatic Heavy Duty Lathe Machine
  • Semi Automatic Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 3 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Admit Betwen center2750 mm
swing ove rbed40 inches
Height of center20 inches
Bed Width22 inches
Brand/MakeSE
ModelEKPL-1422
BrandSHORI EXIM
Size14FT

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Parts of Lathe Machine are Bed, Legs, Headstock, apron, Tailstock, Spindle, Saddle, Tool Post, Carriage, Cross-slide, Tool Rest. Now understand bit about all these parts. Bed forms the base or the platform on which the different fixed and operations parts of the Lathe are mounted. Bed bears two important parts- headstock and tail stock, to support the work piece, and functionally provides a base, for the movement of carriage assembly, which carries the tool. Bed is heavily ribbed in design construction and robust in structure. We provide Bed in three models Banka 35, 36, 43 and 60 models. The bed ways align the components of the lathe.
Request
Callback


Additional Information:

  • Item Code: EKPL-1422
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Horizontal Lathe Machine

Horizontal  Lathe Machine
  • Horizontal  Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 4.25 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automation Grade Automatic
LayoutHorizontal
Lathe Machine TypeHorizontal Lathe
Max Swing Over Bed750-1000 mm, 750-1000 mm
Max Spindle Speed2000-3000 rpm, 2000-3000 rpm
Max Turning Diameter 500-1000 mm, 500-1000 mm

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Shori Exim India Private Ltd is leading and original equipment Lathe Machine Manufacturer, which is commonly used, to remove unwanted material, once work piece is rotated, against a cutting tool. We provide best machines, by gathering authentic high grade resources, from trusted suppliers, which makes our machines, long lasting and more efficient. The precision-engineered arrays, in Lathe machinery tool kit, truly play an important role in the industrial revolution in India, as well as in the rest of the world.
Request
Callback


Additional Information:

  • Item Code: EKPL-1624
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Semi Automatic Heavy Duty Lathe Machine

Semi Automatic Heavy Duty Lathe Machine
  • Semi Automatic Heavy Duty Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 5.25 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
spindle speed6
Swing over bed22 inches
Height of center24 inches
Width Of Bed26 inches
Admit Between center3000 mm
ModelEKPL-1826
BrandShori Exim
ApplicationTurning/ Grinding/Facing/Threading

WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Shori exim india manufactures 14 ft heavy duty lathe machine with turning diameter capacity 40 inches
  • This machine is perfect for heavy duty roll turning and roll grinding work.This machine is known roll turning lathe machine, roll grinding lathe machine
  • Grinding can be done with the help of tool post grinding attachment.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1426

BED LENGTH

4200 MM

WIDTH OF BED

650 MM

HEIGHT OF CENTER

600 MM

SPINDLE BORE

130 MM

SWING IN GAP

1500 MM

SWING OVER BED

1200 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

3000 MM

LEADING SCREW DIA.

55 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKPL-1426
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested
View PDF

Heavy Duty Big Bore Lathe Machine

Heavy Duty Big Bore Lathe Machine
  • Heavy Duty Big Bore Lathe Machine
Get Best Quote
Approx. Price: Rs 2.6 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Bed Width18 inches
Height of center16 inches
spindle speeds6
LayoutHorizontal
Brand/MakeSHORI EXIM
ModelEKLB-1018
Spindle Bore250mm

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Every part of machinery manufactured and assembled in your PVC Pipe Big Bore Lathe Machine is put to strict quality assurance testing. These measures ensure longer machine life, and better services to you and your clients. Lathe machine is used in various Industries. Some of these industries are glass working, Parts reclamation, metalworking, woodturning, thermal spraying, metal spinning etc
Request
Callback


Additional Information:

  • Item Code: EKLB-1018
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested

V Belt Driven Lathe Machine

V Belt Driven Lathe Machine
  • V Belt Driven Lathe Machine
  • Plant
  • V Belt Driven Lathe Machine
Get Best Quote
Approx. Price: Rs 2.6 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Admit Between Centre2500 mm
Bed Length14 feet
Spindle SpeedSix
Swing Over Bed40 inches
Height of Center500 mm
Width of Bed550 mm
HP Required5 HP
Spindle Bore75-200 mm
Model No.EKLV-1422
ApplicationThreading/facing/turning
Power(W)5 hp

WELCOME TO SHORIEXIM INDIA.PVT.LTD

Product description
We are dealing withV Belt Driven Lathe Machineand our product is made up of good quality.
Shori exim india pvt ltd prepares vee belt drive lathe machine for easy operation and for easy handling of machine at work,
This machine is suitable for turning/ facing and threading of machine maximum turning diameter is 40 inches
Maximum turning length 2500 mm

VEE BELT DRIVE AUTOMATIC HEAVY DUTY LATHE MACHINE
Model NumberKHS-0KHS-1KHS-2KHS-3KHS-4KHS-5KHS-6KHS-7KHS-8
Bed Length5'.6"7'9'10'12"14'16'18'20'
Width of Bed375 mm375 mm375 mm375mm375mm375 mm375 mm375mm375mm
Height of Center305 mm305 mm305 mm305 mm305 mm305 mm305 mm305 mm305 mm
Spindle Bore76 mm76 mm76 mm76 mm76 mm76 mm76 mm76 mm76 mm
Swing Over Bed600 mm600 mm600 mm600 mm600 mm600 mm600 mm600 mm600 mm
Spindle Speed888888888
Admit Between Centre525 mm1000 mm1600 mm1900 mm2500 mm3100 mm3710 mm4320 mm4930 mm
Request
Callback


Additional Information:

  • Item Code: EKL1422
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested

Full Geared- High Speed Precision Lathe Machines

Full Geared- High Speed Precision Lathe Machines
  • Full Geared- High Speed Precision Lathe Machines
Get Best Quote
Approx. Price: Rs 3.52 Lakh / UnitGet Latest Price

Product Details:

Height of Centre270 mm
Distance Between Centre1500 mm
Width of Bed325 mm
Size9 Feet
Spindle Bore54 mm
Main Power3 HP

WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Built with power, precision and versatility for achieving unmatched capabilities in precision turning.
  • Rigid rectangular section wide bed.
    Short spindle and shafts for maximum drive rigidity.
    Straight bed and gap version with removable bridge piece.
    All drive gears in headstock are case hardened and ground.
    Dry sump lubrication for minimum thermal deformation.
    • Induction hardened integral guideways on bed.
Request
Callback


Additional Information:

  • Item Code: Essal-270x1500
Yes! I am Interested

Semi Automatic Gear Head Lathe Machine

Semi Automatic Gear Head Lathe Machine
  • Semi Automatic Gear Head Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 5 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Distance Between Centre2500 mm
Width of Bed510 mm
Main Power7.5 HP
Height of Centre460 mm
Spindle Bore104 mm
Size14 Feet

  • WELCOME TO SHORIEXIM INDIA.PVT.LTD

  • Shori exim india manufactures semi automatic geared lathe machine in india.
  • Being the most respected organization guided by experienced and knowledgeable professionals, we provide an enormous assortment ofSemi Gear Head Lathe Machine. This machine is manufactured under the visionary guidance of trained professionals using supreme grade components and advanced techniques in adherence to set industry norms. Our offered machine is used for drilling, cutting, knurling and deformation work in different industries.
Request
Callback


Additional Information:

  • Item Code: Essal-460x2500
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested
View PDF

Lathe Machine

Lathe Machine
  • Lathe Machine
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ConditionNew
Automation GradeSemi-Automatic
Motor Power (HP)3hp
Automatic GradeSemi-Automatic

WELCOME TO SHORIEXIM INDIA.PVT.LTD
Shori exim india pvt ltd is a leading Manufacturer of semi automatic 10ft heavy duty lathe machines in india
athes are used inwood turning,metalworking,metal spinning,thermal spraying, parts reclamation, and glass-working. Lathes can be used to shapepottery, the best-known design being thepotter's wheel. Most suitably equipped metalworking lathes can also be used to produce mostsolids of revolution, plane surfaces and screw threads orhelices. Ornamental lathes can produce three-dimensional solids of incredible complexity. The workpiece is usually held in place by either one or twocenters, at least one of which can typically be moved horizontally to accommodate varying workpiece lengths. Other work-holding methods include clamping the work about the axis of rotation using a chuck orcollet, or to afaceplate, using clamps ordogs
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested

Roll Turning Lathe Machine

Roll Turning Lathe Machine
  • Roll Turning Lathe Machine
Get Best Quote
Approx. Price: Rs 16 Lakh / PieceGet Latest Price
WELCOME TO SHORIEXIM INDIA.PVT.LTD


Shori Exim India Manufactures Roll Turning Lathe Machines .The legs from the supporting structures that carry the entire load of machine and function to elevate the lathe bed to a working height. Headstock is located on the one end of the bed. The headstock contains the high precision bearings which hold the horizontal axle--known as the spindle. Headstock serves as housing station for the back gears, the feed reverse gear, driving pulleys, headstock spindle, and live center. Further a quick-change gear-box is placed below the headstock and contains a number of different sized gears. These intermediate gears allow the correct ratio and direction to be set for cutting threads or worm gears. The apron is fastened to the saddle and it houses the gears, clutches and levers required to move the carriage or cross slide.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-3640

BED LENGTH

10800 MM

WIDTH OF BED

1000 MM

HEIGHT OF CENTER

950 MM

SPINDLE BORE

130 MM

SWING IN GAP

2400 MM

SWING OVER BED

1800 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

8500 MM

LEADING SCREW DIA.

75 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLR-3640
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
View PDF

Semi-Automatic Geared Heavy Duty Horizontal Lathe Machines

Semi-Automatic Geared Heavy Duty Horizontal Lathe Machines
  • Semi-Automatic Geared Heavy Duty Horizontal Lathe Machines
  • Semi-Automatic Geared Heavy Duty Horizontal Lathe Machines
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ModelEMT
Automation GradeAutomatic

Shori exim india pvt ltd manufactures Semi-Automatic Geared Heavy Duty Horizontal Lathe Machines for turning and facing heavy jobs .
Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
Yes! I am Interested

Special Purpose Lathe Machine

Special Purpose Lathe Machine
  • Special Purpose Lathe Machine
  • Plant
Get Best Quote
Approx. Price: Rs 3.75 Lakh / PieceGet Latest Price

WELCOME TO SHORIEXIM INDIA.PVT.LTD



Shori exim india manufactures 16 ft heavy duty lathe machine with turning diameter capacity 44 inches
This machine is perfect for heavy duty roll turning and roll grinding work.This machine is known roll turning
Lathe machine, roll grinding lathe machine
Grinding can be done with the help of tool post grinding attachment.


Metalworking is the process of working with metals to create individual parts, assemblies, or large-scale structures. The term covers a wide range of work from large ships and bridges to precise engine parts and delicate jewelry. It therefore includes a correspondingly wide range of skills, processes, and tools.
Metalworking is a science, art,[1][2] hobby, industry and trade. Its historical roots span cultures, civilizations, and millennia. Metalworking has evolved from the discovery of smelting various ores, producing malleableand ductile metal useful for tools and adornments. Modern metalworking processes, though diverse and specialized, can be categorized as forming, cutting, or joining processes. Today's machine shop includes a number of machine tools capable of creating a precise, useful workpiece.urning is a metal cutting process for producing a cylindrical surface with a single point tool. The workpiece is rotated on a spindle and the cutting tool is fed into it radially, axially or both. Producing surfaces perpendicular to the workpiece axis is called facing. Producing surfaces using both radial and axial feeds is called profiling.[12]
A lathe is a machine tool which spins a block or cylinder of material so that when abrasive, cutting, or deformation tools are applied to the workpiece, it can be shaped to produce an object which has rotational symmetry about an axis of rotation. Examples of objects that can be produced on a lathe include candlestick holders, crankshafts, camshafts, and bearing mounts.
Lathes have four main components the bed, the headstock, the carriage, and the tailstock.

SHORI EXIM INDIA PVT LTD

MODEL NUMBER

EKL-1624

BED LENGTH

4800 MM

WIDTH OF BED

600 MM

HEIGHT OF CENTER

550 MM

SPINDLE BORE

104 MM

SWING IN GAP

1600MM

SWING OVER BED

1500 MM

NO. OF SPINDLE SPEED

8

ADMIT BETWEEN CENTER

3000 MM

LEADING SCREW DIA.

45 MM

STANDARD ACCESSORIES

STEADY REST, FOLLOW REST, DEAD CENTRE,MOTOR PLATE,

CHANGE GEAR SET , NORTON GEAR BOX/ SEMI NORTON GEAR BOX

Request
Callback


Additional Information:

  • Item Code: EKLV-1624
  • Pay Mode Terms: T/T (Bank Transfer),D/P
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
View PDF

Pipe Big Bore Lathe Machine

Pipe Big Bore Lathe Machine
  • Pipe Big Bore Lathe Machine
Get Best Quote
Approx. Price: Rs 4.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Brand/MakeShori Exim
ModelEKLB-1220
Size12 FT

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing premium quality gamut of Pipe Big Bore Lathe Machine

Product description:

We are one of the leading Manufacturer and exporter of Big Bore Lathe Machine for Threading Pipes. Our Pipes are made up of superior grade raw materials which make it more durable and increase its performance. These pipes are very robust in construction. These are designed in various shapes to fulfill the needs of different types of customers. These Pipes are highly appreciated by our clients in various region of the country. These pipes are easily available in the market at very reasonable range of prices.

Features
:

  • Durable
  • Low prices
  • Robust construction
Request
Callback


Additional Information:

  • Item Code: EKLB-1220
  • Pay Mode Terms: T/T (Bank Transfer),D/P
Yes! I am Interested
X

Explore more products



Reach Us
Vishal Shori (Director)
29/23, Dhir Road, Byepass
Bhandari Gate, Batala- 143505, Punjab, India



Call Us

Share Us

F GT L


Send E-mailSend SMS